Product Name :
8-Arm PEG-X/Y , MW 10k-40k
Classification :
PEG Products / 8-Arm PEG-X/Y , MW 10k-40k
Description :
Bifunctional 8-Arm PEG reagents have two functional groups X/Y with 1:7, 2:6, 4:4 , 6:2, 7:1 ratios. We started offering this series of special reagents as customs synthesis with the following combinations. We are also listing some of these reagents as regular catalog products that are ready to ship overnight (these are listed below). 8-Arm PEG-X/Y is prepared using our proprietary chemistry resulting in precisely controlled ratios.8-Arm PEG-Amine(1)/Norbornene(7) MW 10k;8-Arm PEG-Amine(1)/Norbornene(7) MW 20k;8-Arm PEG- Amine(7)/Maleimide(1) MW 10k;8-Arm PEG-Amine(7)/Thiol(1) MW 40k;8-Arm PEG-Amine(7)/Thiol(1) MW 10k;8-Arm PEG-Azide(7)/Maleimide(1) MW 10k;8-Arm PEG-Acrylamide(1)/Hydroxy(7) MW 20k;8-Arm PEG-Acrylate(1)/Azide(7) MW 10k;8-Arm PEG- COOH(1)/Alkyne(7) MW 10k;8-Arm PEG-NHS(7)/Azide(1) MW 10k;8-Arm PEG-Biotin(1)/Norbornene(7) 20k;8-Arm PEG-Biotin(1)/Mal(7) MW 20k;8-Arm PEG-Biotin(1)/Mal(7) MW 10k;8-Arm PEG-DBCO(1)/ Methacrylate(7) MW 10k;8-Arm PEG-DBCO(1)/Acetamide(7) MW 40k;8-Arm PEG-DBCO(1)/ Rhodamine(7) MW 20k;8-arm PEG-Biotin(1)/FITC(7) MW 10k;8-arm Biotin(1)/Succinimidyl NHS ester(7) MW 20k;8-Arm PEG-SC(7)/Azide(1) MW 20k;8-Arm PEG-Hydrazide(6)/MAL(2) MW 10k;Other pairs of functional groups include:Amine/Biotin.Amine/Maleimide.Amine/Azide.Amine/Acrylamide.Amine/Thiol.Amine/Acid.Amine/FITC.Amine/Rhodamine.Biotin/Maleimide.Biotin/Azide.Biotin/Acid.Biotin/Thiol.Thiol/Acid.Maleimide/FITC.
Properties:
Molecular weight: 8-Arm PEG MW refers to the MW of the entire PEG molecule. The MW of each arm is 1/8 of the MW indicated in the product name. MW of PEG was measured by MALDI-MS or GPC. PDI (polydispersity index) of our 8-Arm PEG is 1.02-1.06 with very narrow MW distribution. The number of repeating ethylene oxide units (CH2CH2O) or the degree of polymerization is calculated dividing the PEG MW by 44 (44 is the molecular mass of one repeating unit).Solubility: Soluble in water and aqueous buffer, chloroform, methylene chloride, DMF, DMSO, and less soluble in alcohol, toluene. Not soluble in ether.Density: PEG density is approximately 1.125 g/mLPhysical form: PEG products generally appear as white or off-white powder, and for certain special 8-arm PEGs, it may appear as wax-like, semi-solid material due to low MW and the type of functional groups.Storage condition: PEG product shall be stored in the original form as received in a freezer at -20C or lower for long term storage. Stock solution of PEG reagents that do not contain oxygen or moisture sensitive functional groups may be temporarily stored in a refrigerator or ambient temperature for multiple days. Stock solution should avoid repeated freeze-and-thaw cycles. See Documents section for detailed storage and handling conditions.
References:
Related websites: https://www.medchemexpress.com/antibodies.html
Popular product recommendations:
Fatty Acid Synthase Rabbit mAb Protocol
PDK1 Rabbit mAb In stock
SQSTM1/p62 Antibody (YA062): SQSTM1/p62 Antibody (YA062) is a non-conjugated and Rabbit origined monoclonal antibody about 48 kDa, targeting to SQSTM1/p62. It can be used for WB,IHC-F,IHC-P,ICC/IF,IP assays with tag free, in the background of Human, Mouse.